What is loading ramp?
A hydraulic loading ramp is a piece of equipment used to facilitate the loading and unloading of goods or vehicles onto a truck or trailer. It is usually made of pressure-resistant steel and features a hydraulic system that allows for easy adjustment of the ramp's height and angle. This makes it easier to bridge the gap between the truck bed and the ground, allowing for safe and efficient loading and unloading operations. These ramps are often used in warehouses, distribution centers, and ports to streamline logistics processes.
The height and angle of the loading ramp are adjusted by the hydraulic system. The hydraulic system consists of a hydraulic pump, oil tank, oil pipe, oil cylinder and control valve. When the operator manually turns on the hydraulic pump, the hydraulic oil is pumped into the oil cylinder, causing the piston in the oil cylinder to move upward, thereby increasing the height of the ramp. By adjusting the control valve, the lifting speed and height of the oil cylinder can be controlled to ensure that goods or vehicles can enter and exit smoothly.
Loading ramps Factory real shotsHow many types of hydraulic loading ramps are there?
Hydraulic loading ramps can generally be divided into two types: fixed and mobile. Fixed loading ramps are installed in fixed locations and are usually used in fixed loading and unloading areas. Fixed loading ramps are mostly used in pre-made pits or places with height differences from the pickup area. Fixed loading ramps rely on electricity for lifting and lowering. Mobile loading ramp: it is a cargo loading and unloading auxiliary equipment used in conjunction with forklifts, The height can be adjusted according to the height of the car compartment. With the help of this equipment, the forklift can directly drive into the interior of the car for batch loading and unloading operations. It only needs one person to operate and no external power supply is needed to realize safe and fast loading and unloading of goods, which can not only reduce your labor intensity, but also double the loading and unloading. Improve operating efficiency, speed up material circulation, and obtain greater economic benefits.
This article will focus on the mobile loading ramp which has the largest market demand and the best sales.
Main Types price & Applications
(1) Aluminum Loading Ramps
Features: Lightweight, corrosion-resistant, load capacity 1,000kg–5,000kg
Best for: Frequent relocation, such as in distribution centers
Price: $200–800/pair (varies by length and load capacity)
(2) Steel Ramps
Features: Ultra-durable, supports up to 10,000kg+, anti-slip design
Best for: Construction sites and agricultural equipment
Price: $500–2,000/pair
(3) Folding Ramps
Features: Foldable for compact storage, load capacity 3,000kg–8,000kg
Best for: Temporary use or space-limited environments
Price: $300–1,500/pair
(4) Adjustable Ramps
Features: Hydraulic or mechanical height adjustment for varying vehicle needs
Best for: Logistics hubs with inconsistent dock heights
Price: $1,000–5,000+
Key Purchasing Factors
| Parameter | Recommended Value | Notes |
|---|---|---|
| Load Capacity | ≥1.5x equipment weight | Ensures safety margin |
| Ramp Length | Follow a 1:4 slope ratio | Too long wastes space; too steep is hazardous |
| Anti-Slip Surface | Grooved treads/coated surface | Prevents slipping in rain/snow |
| Material | Aluminum (lightweight) / Steel (heavy-duty) | Choose based on usage frequency |
| Edge Protection | Side rails or anti-roll features | Prevents equipment misalignment |
4. Price Reference (2025 Market Rates)
| Type | Load Capacity | Length | Price Range ($/pair) |
|---|---|---|---|
| Mobile Light Aluminum Ramp | 1,000–2,000kg | 1.5m–2m | $200–500 |
| Mobile Heavy Steel Ramp | 5,000–10,000kg | 2m–3m | $800–2,000 |
| Mobile Folding Ramp | 3,000–6,000kg | 2m–2.5m | $400–1,200 |
| MobileHydraulic Adjustable Ramp | 8,000kg+ | Custom lengths | $2,000–10,000 |
Tip: Bulk orders (10+ pairs) often qualify for 5%–15% discounts!
How to choose a Mobile loading ramp?
The choice of Mobile loading ramp depends on the load requirement. At present, the standard load Mobile loading ramps we produce are 6 tons, 8 tons, 10 tons, 12 tons, 15 tons, and 20 tons. Of course, because we are an OEM factory, we can customize Mobile loading ramps with larger loads or other requirements according to the different needs of customers.
This article will first introduce the Mobile loading ramp with standard load.
First of all, the size of a single Mobile loading ramp is very large, with a length of 11300mm. A standard Mobile loading ramp can only be transported by a 40ft container, and a 40ft container can carry up to 5 standard Mobile loading ramps at the same time, so if you buy one separately, the freight is very high. If a customer only wants to buy one separately, we recommend making it into a split-column type. As the name implies, a 11300mm long Mobile loading ramp is made into two sections, which can be stacked up during transportation, just enough to fit into a 20ft container, thereby reducing transportation costs. A 20ft container can carry up to 2 split-column Mobile loading ramps at the same time.
How does Mobile loading ramp work?
Mobile loading ramp operation instructions:
1. Put the tailgate down
2. Tighten the hand pump valve clockwise
3. Press the hand lever up and down to adjust it to a height higher than the floor of the carriage
4. Reverse the truck to the bottom of the carrier plate, and tighten the handbrake
5. Unscrew the valve of the hand pump clockwise, put the carrier plate on the bottom plate of the car, fix the connecting chain with the car and tighten it
6. Put the car stopper to the rear
7. Fully relieve the pressure of the oil cylinder, and the oil cylinder is in a state of no pressure during use
8. Place the manual outrigger in a vertical state, crank it until it touches the ground and fix it, and then fix the pivot pin.
How can we get the mobile loading ramp that suits us?
First of all, welcome to consult our equipment. Secondly, our mobile loading ramp is customized for you according to the load you need. Whether it is equipment over 20 tons or under 20 tons, we can produce it according to your requirements. In addition, the size of the equipment, the material of the table, etc. can also be customized according to needs.
After you have selected the equipment that suits you, we will make a quotation. If you think it is suitable, we will discuss the next step of transportation. Our shipper can deliver the goods to your port or to your door according to your needs.
We are a supplier with very rich export trade experience and can provide you with one-stop service.
FAQ
1.How Do I Choose the Right Mobile Ramp?
Key Considerations:
✅ Load Capacity – Must exceed your heaviest load (include a 20% safety margin)
✅ Ramp Length – Longer ramps = gentler slope (recommended max 15° incline)
✅ Surface Material – Steel (durable), aluminum (lightweight), or rubber-coated (anti-slip)
✅ Mobility Features – Wheels, handles, or foldable design for easy transport
2. What Are the Safety Standards for Mobile Ramps?
EN 131 (Europe) – Specifies requirements for portable ladders and ramps
OSHA 1910.29 (USA) – Covers fall protection on loading docks
AS 1657 (Australia) – Fixed and portable access equipment standards
Always check for manufacturer certifications before purchase.
3. How Much Weight Can a Mobile Loading Ramp Hold?
Most commercial ramps support 1,000kg to 10,000kg, with heavy-duty models reaching 20,000kg+.
Example Uses:
1,000-3,000kg – Pallet jacks, small forklifts
5,000-10,000kg – Industrial machinery, large forklifts
10,000kg+ – Construction equipment, agricultural vehicles
4. Can Mobile Ramps Be Used on Uneven Ground?
Yes, but only with:
✔ Adjustable legs or stabilizers
✔ Non-slip base pads
✔ Hydraulic leveling systems (premium models)
Avoid using standard ramps on slopes >5° without proper support.
5. What Maintenance Do Mobile Ramps Require?
Weekly: Inspect for cracks, loose bolts, or bent supports
Monthly: Lubricate moving parts (hinges, wheels)
After rain/snow: Dry thoroughly to prevent corrosion
Steel ramps may need anti-rust treatment annually.
6. Where Can I Buy Reliable Mobile Loading Ramps?
Recommended Suppliers:
Global Brands: Haulotte, Pentalift, Dura-Ramp
Budget Options: Titan Ramps, Black Widow, Yutrax
Custom Solutions: Buyers Products, Beacon Industries
Tip: Request load test certificates before purchasing.
7. What’s the Average Lifespan of a Mobile Ramp?
| Material | Average Lifespan | Maintenance Needs |
|---|---|---|
| Aluminum | 8-12 years | Low (corrosion-resistant) |
| Steel | 10-15 years | Moderate (rust prevention) |
| Rubber-Coated | 5-8 years | High (surface wear) |
8. Can I Rent Instead of Buying?
Yes! Rental costs 50−50−300/day, ideal for:
Short-term projects
Testing different ramp types
Emergency replacements
Best rental companies: United Rentals, Sunbelt Rentals, Herc Rentals.
Final Tips Before Buying
Test before purchase – Check stability with your equipment
Compare warranties – Look for at least 1-3 years coverage
Prioritize safety – Anti-slip surfaces & guardrails prevent accidents
Need help choosing? Contact us for a free consultation on the best ramp for your needs!
